Gate Frame Kit

Pre-fabricated steel gate frame kit

Zinc plated

All beams 30X30x1.7

Optional width X 1850mm

Sleeve-in design

Tight fit with 1mm gap

Kit includes

1)frame arms X2

2)beams X 3

3) Metal Screws

How to install:

1. Insert all three beams into one frame arm until they fit snugly.

2. Align the other frame arm with the inserted beams and slide it on, ensuring each beam is inserted about 10mm before pushing further.

3. Position the frame vertically so that the beams are standing upright.. Use a hammer to gently tap the frame arm until it sits firmly against the beams.

4. Measure the width at both ends of the frame. Ensure that both measurements are equal and match the required width.

5. Once aligned, secure the frame using the metal screws.